HRC70 Solid carbide Endmills manufacturers tell you that there are many manufacturers of carbide milling cutters and there are many categories. For example, carbide milling cutters can be roughly divided into: flat end milling cutters, round nose milling cutters, ball end milling cutters, etc., because the types of milling cutters Different, the performance is naturally different. So what are the properties of cemented carbide milling cutters? Which cemented carbide milling cutters have good performance? Let's take a look at the following content to find out.

The performance of our company's carbide milling cutter:
1. The HRC70 Solid carbide Endmills manufacturer tells you that it has high hardness and wear resistance, that is, it is harder than the workpiece material, and has strong wear resistance; the wear resistance of the milling cutter is very high, so that the tool will not be worn, to extend its service life.
2. It has high enough strength and toughness to ensure that it can withstand the impact force and vibration during cutting, and prevent chipping and breaking. Because the milling cutter has to bear a very large impact during cutting, the milling cutter must be made of materials with High strength, otherwise it will break or be damaged.
3. HRC70 Solid carbide Endmills manufacturers tell you that it has high heat resistance, that is, thermal stability, and can maintain a certain hardness, wear resistance, strength and toughness at high temperatures, because carbide milling cutters are used in cutting operations. There will be a lot of heat generated, not only can it maintain high hardness at high temperature, but also can continue to perform cutting performance, and this high temperature hardness is called hot hardness or red hardness.
4. HRC70 Solid carbide Endmills manufacturers tell you that it has good craftsmanship, such as forging, heat treatment, grinding, etc., to facilitate the manufacture of milling cutters.