The HRC65 round head end mill manufacturer tells you that the thinner the milling cutter, the more sensitive it is to vibration and tensile stress during use. If there is a large radial runout or axial runout, it is easy to cause damage, so the milling machine should run in the best condition, that is, the machine tool High precision, good shank rigidity, smooth transmission, constant feed per tooth, and sufficient cooling.

1. The manufacturer of HRC65 round head end mill tells you to check the power and stiffness of the machine tool to ensure that the required diameter of the milling cutter can be used on the machine tool.
2. The overhang of the tool on the spindle should be as short as possible to reduce the impact of the axis of the milling cutter and the position of the workpiece on the impact load.
3. The alloy milling cutter adopts the correct milling cutter pitch suitable for the process to ensure that there are not too many blades meshing with the workpiece at the same time to cause vibration. The HRC65 round head end mill manufacturer tells you that on the other hand, in milling Make sure there is sufficient insert and workpiece engagement when narrowing workpieces or milling pockets.
4. Make sure to use a feed per insert to get the correct cut when the chips are thick enough to reduce tool wear. HRC65 round head end mill manufacturers tell you to use indexable inserts with positive rake geometry to obtain smooth cutting results and low power.
5. Select the diameter of the milling cutter suitable for the width of the workpiece.
6. Select the correct main declination angle.
7. Place the milling cutter correctly.
8. Use cutting fluid only when necessary.
9. Follow tool maintenance and repair rules and monitor tool wear.
The HRC65 round head end mill manufacturer introduced how to maintain the milling cutter today.