Focusing On The Production Of Tungsten Steel Cutting Tools With High Speed, High Performance And High Hardness.

HRC55 end mill carbide tools manufacturers take you to understand the performance of carbide milling cutters

classification: News



Release time:2022-04-20 14:52

HRC55 end mill carbide tools manufacturers tell you that there are many manufacturers of carbide milling cutters and there are many categories. For example, carbide milling cutters can be roughly divided into: flat end milling cutters, round nose milling cutters, ball end milling cutters, etc.because milling cutters Different types have different performances. So what are the properties of cemented carbide milling cutters? Let's take a look at the following content.

Cheap HRC55  end mill carbide tools supplier(s) china
The properties of carbide milling cutters are:
1. It has high hardness and wear resistance, that is, it is harder than the workpiece material. The manufacturer of HRC55 end mill carbide tools tells you that it has strong wear resistance; the wear resistance of the milling cutter is very high, so the tool will not be worn. , in order to prolong its service life.
2. It has high enough strength and toughness to ensure that it can withstand the impact force and vibration during cutting, and prevent chipping and breaking. Because the milling cutter has to bear a very large impact during cutting, the milling cutter must be made of materials with High strength, otherwise it will break or be damaged.
3. It has high heat resistance, that is, thermal stability. The manufacturer of HRC55 end mill carbide tools tells you that it can maintain a certain hardness, wear resistance, strength and toughness at high temperatures, because the carbide milling cutters are cutting There will be a lot of heat generated during operation, not only can it maintain high hardness at high temperature, but also can continue to perform cutting performance, and this high temperature hardness property is called hot hardness or red hardness.
4. It has good manufacturability, such as forging, heat treatment, grinding, etc., so as to facilitate the manufacture of milling cutters.
The above is the HRC55 end mill carbide tools manufacturer's introduction to the performance of carbide milling cutters. It can be seen that the performance is very good. If you have friends in need, please contact our company.