Focusing On The Production Of Tungsten Steel Cutting Tools With High Speed, High Performance And High Hardness.

Which HRC70 Solid carbide Endmills has good performance

classification: News



Release time:2022-10-21 14:02

There are many HRC70 Solid carbide Endmills merchants and many classifications. For example, carbide milling cutters can be roughly divided into: flat end milling cutters, round nose milling cutters, ball end milling cutters, etc. Because of different types of milling cutters, the performance is naturally different. So what are the properties of cemented carbide milling cutters? Which cemented carbide milling cutters have good performance? Let's take a look at the following content to find out.

Low price HRC70 Solid carbide Endmills from China manufacturer
The properties of HRC70 Solid carbide Endmills are:
1. It has high hardness and wear resistance, that is, it is harder than the workpiece material and has strong wear resistance; the wear resistance of the milling cutter is very high, so that the tool will not be worn, and its service life can be extended.
2. HRC70 Solid carbide Endmills has high enough strength and toughness to ensure that it can withstand the impact force and vibration during cutting, and prevent chipping and breaking. Because the milling cutter has to bear a very large impact during cutting, the production of the milling cutter The material must have high strength, otherwise it will break or be damaged.
3. It has high heat resistance, that is, thermal stability, and can maintain a certain hardness, wear resistance, strength and toughness at high temperatures, because cemented carbide milling cutters will generate a lot of heat during cutting operations. , not only can maintain high hardness at high temperature, but also can continue to perform cutting performance, and this property with high temperature hardness is called hot hardness or red hardness.
4. HRC70 Solid carbide Endmills have good manufacturability, such as forging, heat treatment, grinding, etc., to facilitate the manufacture of milling cutters.